HPI Towing Belt Adapter — Lancer Evo X (CZ4A) Front
The HPI Towing Belt Adapter — Lancer Evo X (CZ4A) Front — a bolt-on recovery-point adapter for the HPI towing belt, dimensioned to the specific chassis.
Brand: HPI
Product Name: HPI Towing Belt Adapter — Lancer Evo X (CZ4A) Front
Line: HPI Towing Belt system
Vehicle: Lancer Evo X
Position: Front
Part Number: HPCG-TBAD-1M01
The towing belt itself is NOT included. A 24 mm thin-walled socket is required at install (outer Ø under 31.5 mm). Remove on public roads — the fitting is a protrusion.
A chassis-specific recovery point for the HPI towing belt system. Built around the Lancer Evo X factory recovery hole with the belt feeding straight through so there is no cross-load on the chassis.
Features:
- Chassis: Lancer Evo X: Bolt pattern specific to this car; not interchangeable with other adapters.
- Position: Front: Front or rear specific — note the suffix on the part number.
- Belt Not Included: The towing belt itself is purchased separately.
- 24 mm Thin-Walled Socket: Required at install; outer diameter under 31.5 mm.
- Remove on Public Road: Fitting is a potential protrusion — remove outside track use.
For Lancer Evo X owners trailering or recovering the car for circuit use.